(845) 629-6619
armorseal@gmail.com





GAF Master Select Certified
Seam-free Restoration
Fully Insured


Click to view large size picture . . ."Up To 43% Of Leaky Low-Slope Roofs Can Be Saved Using TOPCOAT SeamFree Restoration Systems!

GAF TOPCOAT 10 YEAR EMERALD PLEDGE *NDL WARRANTY FOR LOW-SLOPE ROOFS & WALLS

GAF TOPCOAT 5, 10, 15, 20 YEAR DIAMOND PLEDGE *NDL GUARANTEE FOR METAL AND CONCRETE ROOFS *( NDL ) NO DOLLAR LIMIT

For more than 20 years, TOPCOAT's SeamFree restoration systems have saved building owners millions of dollars in roof replacement costs. In fact, we've found that nearly half (43%) of leaky low-slope and (100%) of metal roofs can be saved using the TOPCOAT System.Click to view large size picture . . .

Armorseal will inspect your roof and provide you with an Inexpensive Guaranteed, Quality Certified GAF TOPCOAT Restoration System.

Not All Roof Restoration Systems Are Alike: TOPCOAT Has Been Proven On Over 200 Million Square Feet Since 1979!
Advantages Of Restoration: Click to view large size picture . . .

 

  • Conserves Cash...Saves up to half the cost of a new roof; project can also be staged over several years for improved cash flow
  • Extends Life...adds up to 20 years to the life of the existing roof
  • Peace Of Mind...manufacturers' no-dollar-limit guarantees available up to 20 years
  • Minimal Distribution...installs significantly faster and with considerably less mess than a conventional roof
  • Financial Flexibility...can often be capitalized or expensed (consult your tax advisor)
  • Armorseal is Master-Certified by GAF Materials Corporation, North America's Largest Roofing Manufacturer
  • Our foremen and installers are Factory-Trained to install TOPCOAT SeamFree Restoration Systems

Armorseal Industrial Resurfacing / Quality you can trust

Qualifications:

  • Limited by condition of existing roof...must be moderately good condition
  • Buyer must choose carefully...not all restoration products perform equally

GAF TOPCOAT:

This liquid-applied seamless elastomeric membrane specially designed to seal the entire roof, and has been by GAF Materials Corporation, one of the oldest Commercial and Residential roofing materials manufacturers in the United States

  • Offers high tensile strength and elongation, and is virtually undamaged by extended exposure to solar ultraviolet energy
  • Cures and becomes stronger under the sun's ultraviolet rays
  • Low VOC, non-flammable and presents minimal hazard to the applicator or the environment
  • Water-based for superior protection and easy application
  • Is available in white (for maximum reflectivity) and 15 standard colors
  • Includes a 5-year, 10-year, 15-year and 20-year labor and materials GAF Diamond Pledge NDL Guarantee for approved system applications

TOPCOAT SeamFree Restoration Systems

(restores Metal, BUR, modified bitumen, TPO, PVC, Hypalon, EPDM, and concrete roofing systems)



"Do The Math: How Much Will You Save With TOPCOAT?" 

Which of these scenarios reflect your current situation... 

                                                   Scenario # 1

Your Roof Repairs Are Becoming Excessive, And You Want To Avoid A Costly Investment In A New Roof

  • You may be selling your building, and want to avoid the major expense of a new roof 
  • Or, you may simply prefer to conserve your cash for other investments 

Compare The Typical Cost Of A Tear-Off/Replacement Of Your Existing Roofing System...Out of Pocket Cost: $250-$400 per 100 square feet

With The Typical Cost To Restore Your Existing Roof With The TOPCOAT System

Out of Pocket Cost: $125-$150 per 100 square fee                                                              

Immediate Savings With TOPCOAT: $100-$275 per 100 square feet                                           

Plus additional savings not included above:                                                                                                                                                                                                                                                                                                                                               

  • TOPCOAT energy savings of $3.50 to $4.50 (typical) per 100 square feet/year   
  •  Potential tax advantages (unlike a new roof, TOPCOAT installations can often be expensed or capitalized, at your option-consult with your tax adviser)                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Scenario # 2 :

Your Roof Will Need To Be Replaced In A Few Years-But You Would Prefer To Avoid A Complete Roof Replacement

  • You plan on owning/utilizing the building for several years to come 
  • You're not adverse to investing in a new roof, but would consider other options to conserve cash

Compare The Cost Of A Typical New Roof With No Formal Roof Maintenance Program... 


Total Cost Over 20 Years $618-$631 per 100 square feet

...With The Cost For The Same New Roof, But With A Formal Maintenance Plan Including TOPCOAT Restoration

  • Initial Investment $300/square
  • Maintenance costs in years 1-6 $17.50-$22.75/square
  • TOPCOAT restoration membrane in year 7 $100-$125/square 
  • Maintenance costs in years 8-14 $17.50-22.75/square
  • Energy savings in years 8-14* ($24.50-31.50/square)
  • TOPCOAT restoration membrane in year 14 $100-$125/square
  • Maintenance costs in years 14-20 ($15.00-$19.50/square
  • Energy Savings in years 14-20* ($21.00-$27.00/square)

20-Yr. Cycle Savings With TOPCOAT: $48-$139/square*

When You Figure In The Hidden Energy Savings Of A White Roof, TOPCOAT Systems Help Pay For     Themselves!                                                                                                                                     

 

On a sunny, summer day, a black roof can reach temperatures in excess of 170 degrees F! On the same day, the highly reflective white surface of a TOPCOAT roof can be as low as 110 degrees F! As a result, much less solar radiation is transmitted through the roof and into your facility. With energy prices on the rise, why get saddled with an energy-wasting black roof when you can install an energy-efficient TOPCOAT roof instead?

The magnitude of cost savings from a white roof can be staggering. The U.S. Department of Energy's Oak Ridge National Laboratory provides a convenient method for estimating the cost savings of a white roof. Depending on your location, an energy-saving TOPCOAT roof could offset as much as 30, 50, 70% or more of the original cost to install the roof!

Estimated Energy Savings Of A 50,000 sq ft TOPCOAT Roof Over 15 Years

(Based On Data From Oak Ridge National Labs, U.S. Dept. Of Energy)

1. Augusta, GA $30,000 6. Louisville, KY $20,250

2. Boston, MA $22,500 7. Houston, TX $54,750

3. Fresno, CA $60,750 8.Newark, NJ $33,000

4. Sacramento, CA $40,500 9.Miami, FL $87,000

5. Topeka, KS $15,000 10.Tulsa, OK $24,000

To calculate the savings in other cities, visit the ORNL web site at:

http://www.ornl.gov/sci/roofs+walls/facts/CoolCalcEnergy.htm

 

Click to view large size picture . . .

ANNOUNCING...TOPCOAT-FIRE SHIELD

Class A Fire Safe-Instantly!

(And Maintains Or Improves The Fire Rating On Asphaltic Roofs Too!)

Your Current Roofing System May Not Be Giving You The Protection You Need...Here's Why:

Safety Concerns...

  • Facility Use Change...Your building may not have been constructed to meet the standards required for its current use (do you even know what your roof's fire rating is?
  • System Degradation...Class A installations can gradually lose fire resistance over time
  • Fire Spread...Most conventional Class A rated systems do not extinguish sparks once they start
  • Not Truly Class A...Recent testing has shown that some EPDM roofs thought to be Class A may not meet the criteria for passing the Class A fire test!

Wasted Money...

  • Insurance Costs...Class A roofs may qualify for lower premiums and deductibles (some carriers are even reluctant to insure Class B or Class C roofs!)

Unsurpassed Fire Protection...

Patent pending technology can turn virtually any UL-Classified EPDM (and some asphaltic) roofs systems-existing or new-into a UL Class A rated roof...instantly

TOPCOAT-WALLCOTE

EXTERIOR WALL PROTECTION SYSTEM

Now, A Wall Protection System From the Name You Can Trust...

Waterproofs, Breathes, & Beautifies Virtually Any Exterior Wall...

And Outlasts Paints!

WALLCOTE Looks Like A Paint...But Protects Like A Membrane!

  • Elastomeric Formula...Reduces Blistering, Chipping, Flaking or Peeling
  • Resists...Fungus, Mildew and Bacteria
  • Waterproof...Seals Out Moisture

The Best Choice...

For refinishing aluminum and vinyl siding, as well as wood, stucco, masonry, brick, metal and concrete

Extra Protection For Your Valuable Property...

Specially formulated with a higher solid content, for more protection where you need it (14 mils vs. paint at just 3-5 mils)

Outlasts Others...

Stronger resistance to discoloration and fading while helping to resist blistering, flaking, or peeling

Low-Maintenance...

Eliminates the frequent repainting and maintenance of exterior walls

Long Lasting...

Guarantees available for up to 10 years

GAF WALLCOTE 10 YEAR EMERALD PLEDGE *NDL WARRANTY

GAF TOPCOAT 10 YEAR LIMITED WARRANTY

GAF WALLCOTE VERTICAL WALL SYSTEM 10 YEAR LIMITED WARRANTY

 
Armorseal Corporation | Box 502 | Wallkill NY 12589 | (845) 629-6619
©1999-